Workswell Wiris Pro - Thermal Sensor

WIRIS Pro

 

RADIOMETRIC INSPECTION THERMAL CAMERA

The Workswell WIRIS Pro is a fully radiometric thermal camera that has been specially designed for use with unmanned aerial vehicles (UAVs), or drones. The WIRIS Pro is at the forefront of a new generation of thermal cameras built for the most demanding  applications, including industrial inspections, archaeology, and precision agriculture.

 

BROAD TEMPERATURE RANGE

PRECISE LABORATORY CALIBRATION

THERMAL FRAME

HIGHEST SENSOR RESOLUTION ON THE MARKET

10X OPTICAL RGB ZOOM

INTERCHANGABLE LENSES

STATE-OF-THE-ART BISPECTRAL CAMERA

The Workswell WIRIS Pro is a specially designed thermodiagnostic device. Its thermal camera is equipped with an LWIR microbolometric sensor with 640×512 px resolution (in the 7.5 – 13.5 μm range), and its ‘Super Resolution Mode’ functionality can deliver a final thermogram in 1266×1010 px resolution. The RGB camera comes with Full HD (1920 x 1080 px) resolution and provides an absolutely unrivalled optical ultrazoom 10x in real-time (6.9° to 58.2° field of vision). The highest possible temperature that the thermal camera can measure is 1,500 °C (2 732 °F).

Wiris Pro Camera
Wiris Pro Storage Options

THREE RECORDING OPTIONS

Since the WIRIS Pro records a large amount of radiometric data over the course of a single inspection, we decided that it should be the only drone-mounted camera to have its own internal SSD. The WIRIS Pro comes in two storage capacities – 128 and 256 GB – and its data can be offloaded to an external USB drive or micro SD card as well.

THE WIRIS OS OPERATING SYSTEM

Like all of Workswell’s WIRIS cameras, the WIRIS Pro thermal imager operates on the specially designed WIRIS OS platform. Workswell built the WIRIS OS to ensure the security of its WIRIS systems while enhancing their diagnostic capabilities. The WIRIS OS is simply the only software that enables the maximum utilization of the WIRIS Pro’s hardware. Together, Workswell’s hardware and software offer advanced measurement functions that cannot be replicated by any other product on the market.

Wiris Pro Os Operating System
3D Modeling Workswell Wiris Pro

3D MODELING

High Voltage Wiris Pro

HIGH VOLTAGE

Flat roofs Wiris Pro

FLAT ROOFS

Photovoltaic

PHOTOVOLTAIC

Pipelines

PIPELINES

TECHNICAL INFORMATION

WIRIS Pro Key features description

Super Resolution Mode

WIRIS Pro takes Super Resolution Mode 1.3Mpx IR images in one shot

Operating onboard system

WIRIS OS for full real-time data streaming and control during the flight. Ooperating system ensures the full access to all camera functions. Easy camera control via S.Bus, CAN bus, MavLink, RJ-45 or Trigger

10x Optical Antivibration zoom

Full HD 10x optical zoom camera with anti-vibration compensation

Thermal camera specification

IR camera resolution

640 x 512 pixels

IR Super Resolution Mode

1 226 x 1 010 pixels (improvement of native resolution up to 1.3 Mpx)

FPA active sensor size

1.088 x 0.8705 cm

Temperature ranges

-25 °C to +150 °C (-13 °F to +302 °F). -40 °C to +550 °C (-40 °F to +1 022 °F). Optional temperature range 50 °C to 1 000 °C (122 °F to 1 832 °F). Optional temperature range 400 °C to 1 500 °C (752 °F to 2 732 °F)

Temperature sensitivity

Standard 0.05 °C (50 mK, 0.09 °F) or optional 0.03 °C (30 mK, 0.054 °F)

Accuracy

±2 % or ±2 °C (±3.6 °F)

Frame rate

30 Hz or 9 Hz

Spectral range / detector

7.5 – 13.5 μm / Uncooled VOx microbolometer

Calibration of each lens

Package includes a calibration certificate

Available lenses

18°, 32°, 45°, 69° (exchangeable lenses, all calibrated), visit FOV calculator

Protective filter on lens

Filter protects the lens against external damage during the flight

Digital zoom

1 – 12x continuous

10-pin digital port Interface

S.BUS, CAN bus for DJI M600 and A3 controllers, MavLink, CANbus & UART, External GPS connectivity & External trigger